Services

Fault Finding & Repairs

Eamon Electrical provides fast, reliable electrical fault finding and repairs for homes and businesses across London, from tripping circuits and power loss to faulty sockets, lighting problems and general electrical repairs.

Fast, reliable fault diagnosis

From tripping circuits and power loss to faulty sockets and lighting problems, Eamon Electrical diagnoses and resolves electrical faults safely and efficiently for homes and businesses across London.

Request a Free Quote →

✓

Loss of Power

Diagnosing full or partial loss of power to a property or a specific circuit.

✓

Tripping Circuits & RCDs

Investigating consumer units, RCDs and RCBOs that trip repeatedly or without an obvious cause.

✓

Socket & Switch Faults

Diagnosing and repairing faulty sockets, switches and connections.

✓

Lighting Faults

Diagnosing and repairing faulty lighting circuits and fittings.

✓

Wiring Faults

Investigating damaged, deteriorated or incorrectly installed wiring.

✓

Ongoing Electrical Repairs

General electrical repairs and maintenance for homes and businesses.

FAULT FINDING EXPLAINED

Signs you may have an electrical fault

Electrical faults do not always announce themselves clearly. Recognising the early warning signs, and having them properly diagnosed rather than repeatedly reset or ignored, helps prevent a small issue becoming a bigger one.

Lights flickering or dimmingEspecially when unrelated appliances are switched on, or when it happens consistently in one area of a property.
A circuit or RCD that keeps trippingRepeated tripping is a sign something on that circuit needs investigating, rather than simply resetting each time.
Warm, discoloured or noisy sockets and switchesWarmth, staining, buzzing or crackling around an accessory can indicate a loose connection or fault.
A burning smell or scorch marksAny burning smell or visible scorching near sockets, switches or the consumer unit should be treated as urgent.
Partial or total loss of powerPower loss affecting one circuit, one area or the whole property can have a number of underlying causes.
Sockets that feel loose or won’t hold a plugA physical sign of wear that is worth having checked before it develops into a more serious fault.

If you notice a burning smell, see sparking, or a circuit trips repeatedly, it is sensible to switch off the supply to the affected circuit (or the whole installation, if you are unsure) at the consumer unit, and avoid using it until it has been checked by a qualified electrician.

WHAT TO EXPECT

How fault finding works

Proper diagnosis takes the guesswork out of an electrical fault.

01Understanding the symptomsDetails of what is happening, when it happens and which circuits or areas are affected.
02Diagnostic testingTesting is used to narrow down the cause, rather than guessing or replacing parts unnecessarily.
03Locating the faultOnce identified, the specific cause and location of the fault is confirmed.
04Repair & retestThe fault is repaired and the circuit is retested to confirm it is safe before use.
COMMON QUESTIONS

Fault Finding & Repairs FAQs

Why does my circuit keep tripping?
A circuit or RCD can trip repeatedly for a number of reasons, from a faulty appliance to a fault in the wiring itself. Testing is needed to identify the actual cause rather than simply resetting it each time.
Is a flickering light something to worry about?
Occasional flickering can have simple causes, but persistent flickering, especially alongside other symptoms, is worth having checked rather than ignored.
Can a fault be found without opening up walls or floors?
Diagnostic testing is generally used to narrow down a fault before any physical work is carried out, to keep disruption to a property to a minimum.
Do you carry out the repair as well as the diagnosis?
Yes. Once a fault has been identified, Eamon Electrical carries out the necessary repair and retests the circuit to confirm it is safe.
Do you work on both domestic and commercial properties?
Yes, Eamon Electrical diagnoses and repairs electrical faults for homes and businesses across London.

Get In Touch

Got an electrical fault in London?

Whether you need an EICR, rewiring, fault finding, emergency lighting, a fire alarm system or a new electrical installation, speak to Eamon Electrical today.

info@eamonelectrical.co.uk  ·  6th Floor, 2 Lakeside Drive, Park Royal, London NW10 7FQ